SV1=SV1_0, SV5=SV5_0, ZMK_ECC_FAIL=ZMK_ECC_FAIL_0, SV4=SV4_0, SV3=SV3_0, SV2=SV2_0, SV0=SV0_0
SNVS_HP Security Violation Status Register
| SV0 | Security Violation 0 security violation was detected. 0 (SV0_0): No Security Violation 0 security violation was detected. 1 (SV0_1): Security Violation 0 security violation was detected. |
| SV1 | Security Violation 1 security violation was detected. 0 (SV1_0): No Security Violation 1 security violation was detected. 1 (SV1_1): Security Violation 1 security violation was detected. |
| SV2 | Security Violation 2 security violation was detected. 0 (SV2_0): No Security Violation 2 security violation was detected. 1 (SV2_1): Security Violation 2 security violation was detected. |
| SV3 | Security Violation 3 security violation was detected. 0 (SV3_0): No Security Violation 3 security violation was detected. 1 (SV3_1): Security Violation 3 security violation was detected. |
| SV4 | Security Violation 4 security violation was detected. 0 (SV4_0): No Security Violation 4 security violation was detected. 1 (SV4_1): Security Violation 4 security violation was detected. |
| SV5 | Security Violation 5 security violation was detected. 0 (SV5_0): No Security Violation 5 security violation was detected. 1 (SV5_1): Security Violation 5 security violation was detected. |
| SW_SV | Software Security Violation This bit is a read-only copy of the SW_SV bit in the HP Command Register |
| SW_FSV | Software Fatal Security Violation This bit is a read-only copy of the SW_FSV bit in the HP Command Register |
| SW_LPSV | LP Software Security Violation This bit is a read-only copy of the SW_LPSV bit in the HP Command Register |
| ZMK_SYNDROME | Zeroizable Master Key Syndrome The ZMK syndrome indicates the single-bit error location and parity for the ZMK register |
| ZMK_ECC_FAIL | Zeroizable Master Key Error Correcting Code Check Failure When set, this bit triggers a bad key violation to the SSM and a security violation to the SNVS_LP section, which clears security sensitive data 0 (ZMK_ECC_FAIL_0): ZMK ECC Failure was not detected. 1 (ZMK_ECC_FAIL_1): ZMK ECC Failure was detected. |
| LP_SEC_VIO | LP Security Violation A security volation was detected in the SNVS low power section. |